Upload Your Own DTF Gang Sheet 10% Discount with (WhatTheSilver Membership)

Ships From Houston Wholesale Prices on DTF TRANSFER

We are offering Direct-to-film transfers, shipped directly from Houston.

• WhatTheDTF's can be heated at 310°F for 5 seconds and peeled either hot or cold. (Hot Recommended) Remove the film and heat it for 1 second straight on for a more solid lockdown and clean natural look. (For Glossy Finish, do not perform 2nd step). More Details Below 

How to Order DTF Gang Sheets:

1. Select the length and quantity of sheets you need.
2. Upload Your Design: Click on the Gang Sheet uploader and upload your design with the correct size. If the wrong size is uploaded, your order will be on hold until the correct one is loaded. 
3. Add to Cart: Once you're satisfied, click "Add to Cart" and proceed to review and payment.

Submission Guidelines for Print-Ready Files

To ensure optimal results, please adhere to the following guidelines when submitting your artwork:

File Preparation:

• Ensure your artwork is print-ready and uploaded as a Gang Sheet with your images in 300 DPI or higher
  
• Avoid mirroring images.

Printing Format:

• Your images will be delivered on a roll, without cutting. CMYK Coloring

Shipping Details:

• See shipping rates at check out. Free Standard shipping on orders over $75.00

Artwork Requirements:

• Minimum resolution of 300 DPI.
• Preferred format: .PNG for superior results.
• Ensure a fully transparent background; non-transparent backgrounds will be reproduced as submitted.

Artwork Specifications:

• Minimum line thickness: 0.02 inches (0.5mm) for accurate reproduction.
• Thinner elements may not transfer effectively onto the garment.

Additional Instructions:

• Artwork adjustments or background removal will not be performed. Submitted artwork will be printed as received.
• Ownership or appropriate rights declaration for provided artwork is required upon ordering.

Pressing Guidelines:

• DTF Transfers should be applied at 310°F for 5 seconds and peeled either hot or cold. Remove the film and heat it for 1 second straight on. For 2-sided printing, if you have heat tape and images taped front and back, you can heat both sides at the same time at 315°F for 7 seconds and then remove the film and Press 1 second straight on.
• Or you can do 315°F for 5 seconds one image only then tap for 1 second to lock in. 
• Use a quality heat press with appropriate pressure for the best results.
  
• Hot peel: Peel immediately after pressing for a glossy finish.
• Warm peel: Wait for the transfer to cool slightly for a smoother texture.
• Cold peel: Allow the transfer to cool completely for a matte finish.
• Use a quality heat press with appropriate pressure for the best results.

   

  Peel back the transfer film slowly and evenly to reveal your design.

  Post-Press (Optional)

  To ensure the design is fully adhered to and has a long-lasting finish, you can cover the design with parchment paper and press it again for 3 seconds. This step helps seal the print and improve its durability. (This Step is not needed if you did 1 second Press)

Color Disclaimer:

• Please note that actual colors may vary from those displayed on electronic screens.
• DTF Transfers are printed in CMYK; however, screens typically display RGB colors, leading to potential variations. Color differences are sure to incur.

What are DTF (Direct-to-Film) Transfers?

• DTF Transfers offers a modern, eco-friendly printing solution with no need for vinyl weeding or layering. This method eliminates high MOQ Screen Print Transfers.
• DTF technology provides vibrant, soft, and lightweight prints, ideal for intricate, multi-color designs on a variety of materials such as apparel, hats, tote bags, and even wood.
• No screen setup fees are required, ensuring high-quality results on virtually any surface.

DTF (Direct-to-Film) transfers are versatile and can be applied to a wide variety of fabrics and surfaces. Here’s a list of common items and materials you can use DTF on:

1. Fabrics:

• Cotton
• Polyester
• Blends (cotton/poly blends)
• Nylon
• Lycra/Spandex
• Denim
• Canvas
• Fleece

2. Apparel:

• T-shirts (cotton, polyester, and blends)
• Hoodies and Sweatshirts
• Tank tops
• Jackets
• Sportswear (including jerseys, leggings, and activewear)
• Caps and Hats
• Aprons
• Socks

3. Accessories:

• Tote bags
• Backpacks
• Shoes (fabric-based sneakers or canvas shoes)
• Pillowcases
• Bandanas
• Scarves

4. Other Surfaces (with heat compatibility):

• Home textiles (blankets, curtains, cushions)
• Fabric-based wall art
• Flags and banners

5. Non-Fabric Surfaces (with special adhesive layers):

• Some leather or faux leather items (like wallets, bags)
• Felt materials

DTF transfers work particularly well on a wide range of fabrics because of their durability and vibrant color reproduction. They are perfect for printing designs with complex colors and fine details. DTF also offers flexibility as it doesn't require the garment to be 100% cotton or limited to light or dark fabrics. At Wholesale Prices.